Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Troubleshooting
If your appliance develops a fault, please check the following table before making
a call to your retailer.
Fault
The appliance is
not working
The appliance
turns on, but
the
temperature is
too high/low
The appliance is
leaking water
Probable Cause
The unit is not switched on
Plug and lead are damaged
Fuse in the plug has blown
Power supply
Internal wiring fault
Too much ice on the evaporator
Condenser blocked with dust
Doors are not shut properly
Appliance is located near a heat
source or air flow to the
condenser is being interrupted
Ambient temperature is too high
Unsuitable foodstuffs are being
stored in the appliance
Appliance is overloaded
The appliance is not properly
levelled
The discharge outlet is blocked
Action
Check the unit is plugged
in correctly and switched
on
Call your agent or
qualified Technician
Replace the fuse
Check power supply
Call your agent or
qualified Technician
Defrost the appliance
Call your agent or
qualified Technician
Check doors are shut and
seals are not damaged
Move the appliance to a
more suitable location
Increase ventilation or
move appliance to a
cooler position
Remove ant excessive hot
foodstuff or blockages to
the fan
Reduce the amount of
food stored in the
appliance
Adjust the screw feet to
level the appliance (if
applicable)
Clear the discharge outlet
Werbung
