EINHELL TC-JS 85 Originalbetriebsanleitung Seite 17

ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
4. Technical data
Mains voltage: ............................... 230 V ~ 50 Hz
Power consumption: .................................. 620 W
Stroke speed: ............................. max. 3000 min
Stroke height: ........................................... 20 mm
Saw blade width ................................. 0.8-1.7 mm
Cutting depth, wood: ................................ 85 mm
Cutting depth, plastic: .............................. 12 mm
Cutting depth, iron: ..................................... 8 mm
Miter cut: ........................ up to 45° (left and right)
Protection class: ...........................................II /
Weight: .......................................................2.1 kg
Danger!
Sound and vibration
Sound and vibration values were measured in
accordance with EN 62841.
L sound pressure level ..................... 91.6 dB(A)
pA
K uncertainty ............................................. 5 dB
pA
L sound power level ....................... 99.6 dB(A)
WA
K uncertainty ............................................. 5 dB
WA
Wear ear-muff s.
The impact of noise can cause damage to hea-
ring.
Total vibration values (vector sum of three direc-
tions) determined in accordance with EN 62841.
Cutting wood
Vibration emission value a
K uncertainty = 1.5 m/s
Cutting sheet metal
Vibration emission value a
K uncertainty = 1.5 m/s
The stated vibration emission levels and stated
noise emission values were measured in ac-
cordance with a set of standardized criteria and
can be used to compare one power tool with
Anl_TC_JS_85_SPK7.indb 17 Anl_TC_JS_85_SPK7.indb 17
-1
= 6.1 m/s
2
h
2
= 6.7x m/s
2
h
2
- 17 -
GB
another.
The stated vibration emission levels and stated
noise emission values can also be used to make
an initial assessment of exposure.
Warning:
The vibration and noise emission levels may vary
from the level specifi ed during actual use, depen-
ding on the way in which the power tool is used,
especially the type of workpiece it is used for.
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect wor-
king order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever ne-
cessary.
•
Switch the appliance off when it is not in use.
•
Wear protective gloves.
Residual risks
Even if you use this electric power tool in
accordance with instructions, certain resi-
dual risks cannot be rules out. The following
hazards may arise in connection with the
equipment's construction and layout:
1. Lung damage if no suitable protective dust
mask is used.
2. Damage to hearing if no suitable ear protec-
tion is used.
3. Health damage caused by hand-arm vib-
rations if the equipment is used over a pro-
longed period or is not properly guided and
maintained.
5. Before starting the equipment
Before you connect the equipment to the mains
supply make sure that the data on the rating plate
are identical to the mains data.
Always pull the power plug before making
adjustments to the equipment.
5.1 Safety guard (Fig. 2/Item 15)
•
The safety guard (15) protects the user from
accidentally touching the saw blade (12) but
still gives you an unobstructed view of the
cutting area.
•
The safety guard (15) must always be fitted
when carrying out cutting work.
17.10.2023 10:33:28 17.10.2023 10:33:28