Storage; Maintenance And Servicing / Cleaning; Repairs - Tecsis Reihe P2590 Betriebsanleitung

7. Options and accessories ... 10. Repairs
7.3 Front flange for panel mounting

8. Storage

Before installation, in order to prevent damage from the pressure gauges, follow
the subsequent points:
The pressure gauge should remain in its original packing until installation
„
After taking out the pressure gauge (e.g. for tests) reuse the original
„
packaging material
Storage temperature should not exceed -20 °C ... +60 °C
„
Pressure gauges should be protected against dust and humidity
„

9. Maintenance and servicing / cleaning

These tecsis differential pressure gauges will give very long service when
handled and operated properly. Control and safety devices are to be checked for
their efficiency (see also VDI 3033 Table1).
The instruments should be cleaned with a damp cloth, moistened with soap
solution. The residual pressure medium in dismounted pressure gauges may
be hazardous or toxic. This should be considered if handling and storing the
removed pressure gauges. Sufficient precaution must be taken.

10. Repairs

Repairs should only be carried out by the manufacturer or appropriately trained
personnel. For further technical details see tecsis data sheet DE480.
Hazardous working materials
We would ask for instruments returned or sent in for repair, which have
hazardous materials in the media areas and/or have surface contact with
hazardous materials, to be cleaned beforehand and an accurate as possible
description of the hazardous medium to be supplied for our information.
Operating instructions
Panel
GB
19