EuroLite TCH-50 C-hook Bedienungsanleitung Seite 7

For your own safety, please read this user manual carefully before you initially start-up.
Every person involved with the installation, operation and maintenance of this device has to
- be qualified
- follow the instructions of this manual
- consider this manual to be part of the total product
- keep this manual for the entire service life of the product
- pass this manual on to every further owner or user of the product
- download the latest version of the user manual from the Internet
INTRODUCTION
Thank you for having chosen a EUROLITE TCH-50 C-hook. If you follow the instructions given in this
manual, we are sure that you will enjoy this device for a long period of time.
Unpack your TCH-50 C-hook.
Before you initially start-up, please make sure that there are no transport damages. Should there be any, do
not take the device into operation and immediately consult your dealer.
SAFETY INSTRUCTIONS
This hook has left our premises in absolutely perfect condition. In order to maintain this condition and to
ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning
notes written in this user manual.
Important:
Damages caused by the disregard of this user manual are not subject to warranty. The dealer
will not accept liability for any resulting defects or problems.
The total weight of the installation (=total weight of all individual parts) must never exceed the maximum load
of the hook. In case the maximum load of the hook is too low, you either need to install two hooks or a
different hook with a higher maximum load.
OPERATING DETERMINATIONS
This hook is designed for suspending crossbeams, Alu-Bars, aluminium tubes etc. The maximum load must
never be exceeded.
This hook is designed for professional use, e.g. on stages, in discotheques, theatres etc.
The TCH-50 hook is designed for being installed at crossbeams.
USER MANUAL
TCH-50-hook
7/10 00019824.DOC, Version 1.4