SR Suntour V-Boxx FR9 Benutzerhandbücher Seite 10

SR SUNTOUR - OWNERS MANUAL
Put the shifter to position 1. Bring the
cable in at shifting position No. 3. Run
the cable through the casing into the
shifting unit. Bring the cable almost one
tour around the cable ring. Pull the cable
hard and tighten the fixing bolts using a
2.5mm Allen key.
Turn the shifter to position No. 9 and
bring the cable in. Run the cable through
the casing into the shifting unit. Bring the
cable almost one tour around the cable
ring. Pull the cable hard and tighten the
fixing bolt using a 2.5mm Allen key. After-
wards cut both cables to a proper length
and turn the shifter back to position No.1.
Reinstall the backside plate by using a
Phillips screwdriver No.2.
Check if the tension of the shifting cables
is adequate. If the tension is to high the
shifting will beome to hard. Pull the cabels
slightly. You should have 1-2mm space on
both sides.
2.5 mm
2.5 mm
Vboxx FR9
9
English