EuroLite LED KLS-180 Bedienungsanleitung Seite 28

Stand-alone mode
In the stand-alone mode, the device can be used without controller.
Disconnect the device from the controller. Please refer to the instructions under chapter Control Board.
Control Board
The Control Board offers several features: you can easily set the starting address, run the pre-programmed
program or select a DMX channel mode.
MODE UP DOWN ENTER
Mode
Addr
Stat
Auto
Sound
Speed
Sensitivity
Colo
dIMM
Stro
SILE
Slave
InFr
*
= Please see 8 Channel mode, channels 3 ~ 6 for color choices.
Enter the menu by pressing the MODE-button. Browse through the menu by
pressing UP or DOWN. Press ENTER in order to select the desired menu. You
can change the selection by pressing UP or DOWN. Press ENTER in order to
confirm. You can leave every mode by pressing MODE. The functions provided
are described in the following sections.
Program Description
Setting DMX channel mode
3CH
DMX address setting
4CH
d 001~d 512 3 channels DMX mode
d 001~d 512 4 channels DMX mode
8CH
d 001~d 512 8 channels DMX mode
21CH
d 001~d 512 21 channels DMX mode
S01 – S20
Static colors
Au-1 Auto programs (Master mode)
Program 1
Au-2
Program 2
Program 3
Au-3
So-1 Sound controlled mode (Master mode)
Program 1
So-2
Program 2
Program 3
So-3
Select the desired speed
SP 1—SP9
(increasing)
Microphone sensitivity
Se 1—Se9
Sound controlled mode (increasing)
Color presets (Master-Mode)
r000-255 Red (0-100%)
g000-255 Green(0-100%)
b000-255 Blue (0-100%)
U000-255 White (0-100%)
dI1-dI9 Master dimming
ON Activate Bar strobe program
OFF Deactivate Bar strobe program
Program continues automatically during periods
OFF
without music or bass-beat
Program does not automatically continue during
ON
periods without music or bass-beat
Slave
Slav
Control via IR remote
ON
:enable
Control via IR remote
OFF
:disenable
*
28/36 00105023, Version 1.2