Werbung
Verfügbare Sprachen
Verfügbare Sprachen
OPERATION
After connecting the device to the mains it is ready for operation. The display indicates the last operating
mode. The operating modes can be selected by means of the display and the control buttons. All settings
remain stored even if the device is disconnected from the mains. The device can be operated in stand-alone
mode via the control board and the EUROLITE IR-7 remote control or in DMX-controlled mode via any
commercial DMX controller.
Menu structure
Mode
DMX mode
Preset colors
Automatic mode
Running speed in
automatic mode
Color mix
Color temperature
Dimmer
Fading
Strobe effect
DMX lost
Slave mode
Passcode (Key lock)
IR remote control
Display
13CH
ADDR:001-512
ADDR:001-512
9-CH
ADDR:001-512
DMX
7-CH
ADDR:001-512
5-CH
ADDR:001-512
3-CH
STATIC
01-28
AUTO
01-09
SPEED
01-09
R000-255
G000-255
B000-255
COLOR
W000-255
WW000-255
A000-255
UV000-255
2700
3200
4300
TEMPERAT
5600
6500
8000
DIMMING
01-99
FADING
00-99
FLASH
00-99
Blackout
Hold
Full
DMX lost
Static
Auto
SLAVE
SLAVE MODE
ON
PASSCODE
OFF
ON
INFRARED
OFF
24/32
Function
13-channel mode and start address
9-channel mode and start address
7-channel mode and start address
5-channel mode and start address
3-channel mode and start address
Constant lighting in one of 28 colors
Program 1-9
Program running speed
slow > fast
Red 0-100%
Green 0-100%
Blue 0-100%
Cold white 0-100%
Warm white 0-100%
Amber 0-100%
UV 0-100%
2700 K
3200 K
4300 K
5600 K
6500 K
8000 K
Total brightness (STATIC, AUTO,
COLOR and TEMPERAT modes)
dark > bright
Fading program with increasing
speed
Strobe effect with increasing speed
LEDs go off
Spot holds the last received signal
All LEDs 100% on
Goes to pre-selected static color
01-25
Goes to pre-selected auto program
01-09
Enable Slave mode
Key lock on
Key lock off
IR remote control on
IR remote control off
00129734, Version 1.0
Werbung
