Silvercrest SHM 300 C1 Abbildungen Zur Bedienungsanleitung Seite 8

WARNING! RISK OF INJURY!
Do not change accessories unless the drive is stationary and the
►
mixer is unplugged from the power supply! The appliance will run on
for a short time after being switched off!
Never leave the appliance unattended!
►
Before changing accessories or additional parts that are in motion
►
during operation, the appliance must be switched off and disconnected
from mains power.
Before first use
■ Remove all packaging materials from the
appliance.
■ Clean the appliance as described in the section
"Cleaning and care".
■ Ensure that all parts are completely dry before
operating the appliance.
Assembling the appliance
NOTE
► The appliance will not start until the bowl
and the lid are correctly attached.
1) Place the motor unit
the sucker feet can attach firmly and the
appliance stands firmly in place.
2) Place the bowl
that the arrow
towards the open lock symbol
motor unit . Then turn the bowl
arrow points to the closed lock symbol
and the bowl clicks into place.
If you want to work with the cutting blades
assemble the appliance as described in the section
"Cutting blades".
If you want to work with the food processing
attachments, assemble the appliance as described
in the section "Food processing attachments".
KM 250 C1
on a flat surface so that
onto the motor unit
on the bowl points
on the
until the
Cutting blades
1) Place the cutting blades
shaft . The flattened side of the drive shaft
must correctly fit into the take up of the cutting
blades
cannot be properly attached.
2) Place the lid
arrow ▼ on the lid
arrow
the bowl
3) Turn the lid
points to the arrow
symbol
4) Place the pusher
5) Insert the plug into a mains power socket.
so
,
onto the drive
. Otherwise the cutting blades
onto the bowl
coincides with the
and the opened lock symbol
.
until the arrow ▼ on the lid
and the closed lock
on the bowl .
into the feed tube
GB │ IE │ NI │ CY
so that the
on
.
│
5 ■