Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Product overview
Oven components
5
4
3
2
1
Case cooling
The case cooling ensures low temperatures on control panel,
knob and oven door handle while the oven is in operation.
The case cooling is turned on when a heating mode is set.
The air exits between the oven door and control panel.
Supplied accessories
10
cooking grate
• Grilled dishes
• Cake mold
• Roasting dish
Universal baking tray
• Big cakes
• Biscuits
• Frozen foods
• Fat/juice collection pan
Slide-in racks with
telescopic runners
• These can be easily
removed for cleaning
(see corresponding chapter)
Control panel
Oven lamp
Removable side rack:
Counting the insertion levels
1 to 5 starting from below
Rating label
Oven door
Telescopic runners
The oven has slide-in racks with telescopic runners on 1 level.
• To insert the grate, baking tray or other accessories, first
pull out the telescopic runners (on both sides).
• Place the grate / baking tray / accessory on the pulled out
rails and push them into the oven by hand up to the stop.
• Do not close the oven door until the telescopic slides
are fully inserted.
Note:
In order to ensure the safe use of grate and tray,
it is necessary to insert them the right way round
(with the anti-tipper bracket at the rear).
This prevents the food from slipping forwards
when removed carefully!
Before closing the oven door, make sure
that all accessories are correctly positioned
and do not touch the oven door!
Oven components and accessories
become hot during operation.
Use potholders or similar to avoid burns!
Werbung
