Coccolle Lemira Bedienungsanleitung Seite 8

EN
Warranty conditions
1. The warranty does not cover:
• Damage occurred for reasons attributable to the user.
• Damage occurred as a result of failure to use the product according to
recommendations, warnings and restrictions found in the user manual and on
product elements.
• Consumables subject to natural wear and tear during normal usage such as:
tyres, inner tubes, tread, materials used on handles, structure and colour of
fabrics and materials subject to friction, sleeves in wheels, axels, prints.
• Damage occurred as a result of failure to observe maintenance guidelines
such as: corrosion, changed upholstery or plastic elements colour as a result of
prolonged exposure to sunlight, damage to plastic elements of upholstery as a
result of prolonged exposure to sunlight or excessive temperatures, excessive
play, squeaking / creaking noises, damage to mechanism due to over-load.
• Damage occurred due to repairs being carried out by unauthorised personnel.
• Single wheels being pushed into a vertical position as a result of loading (this
is normal).
• Damage and soiling occurred due to the product being incorrectly packaged for
shipping (courier online purchases).
2. The repair method is determined by the manufacturer/warranty service
provider.
3. The product subject to a complaint should be provided clean.
4. The consumer goods warranty does not exclude or suspend the purchaser's
rights stemming from goods noncompliance with the agreement.
Spare parts list:
1. Canopy
2. Seat
3. Front Bumper
4. Safety buckle
5. Footrest
6. Front wheels
7. Handle bar
8. Rear wheels
9. Basket
10. Brake lever
Stroller assembly
1. Unfold the stroller: according to pic. A, hold the handle and press the second
lock button 1 while also pressing button 2, and lift up the frame until a "click"
sound is heard. Now then stroller opened, as per pic. C.
2. To assemble the rear wheels: insert the rear wheel steel pin into rear leg until
you hear "click".
3. To assemble the front wheels: insert the front wheel steel pin into front leg
until you hear "click".
4. To assemble the front bumper: insert the front bumper adapter into both side
holes until you hear the „click" sound.
8