KKT KOLBE IH85904FZ Benutzerhandbuch Seite 76

Troubleshooting
8.2 Error codes
Error code Meaning
No suitable cookware was
identified
The voltage is too low
(less than 85 V)
The voltage is too high
(higher than 285 V)
Error message of the cooktop
sensor / short circuit
Error message of the IGBT-
sensor / short circuit
Overheating of the hob
IGBT overheating
Malfunction of the cooktop
sensor
Communication failure bet-
ween display and mainboard
Overflow protection
(moisture / liquid or soiling)
8.3 Customer service
Please contact us if you have
technical questions
about your appliance:
76
What to do
Place suitable cookware in the middle of
the corresponding cooking zone
(see chapter on cookware)
Check the power supply.
If it is normal, turn the hob back on.
Contact the customer service
or a certified elecrician.
Wait until the hob has cooled down
and then switch it on again.
Wait until the hob has cooled down
and then switch it on again.
Contact the customer service
or a certified elecrician.
Remove any liquids, moisture or dirt,
especially around the control panel.
If the hob has switched off, switch it on
again.
KKT KOLBE Customer service
Tel. 0049 9502 667930
Mail: info@kolbe.de
www: www.kolbe.de
→ You can find further data and
documents on our website at
Questions & Answers.