Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Using the hob
3. Using the hob
3.1 Starting to cook
• Press the ON/OFF button.
After switching on, a signal tone sounds, all displays light up
for about one second and show
The hob is in standby mode.
• Now place suitable cookware centrally on the desired coo-
king zone(s).
• Make sure that the surface of the hob and the bottom of the
cookware are clean and dry!
• Touch the selection key of the desired cooking zone.
The corresponding power indicator will start flashing.
• Adjust the heating level from 1 to 9 by sliding your finger
over the slider or by directly touching the desired power level
on the slider.
• If you don't choose a power setting within 1 minute,
the hob will automatically switch off.
• You can change the power at any time during cooking by
first selecting the desired cooking zone and then using
the slider.
• If you touch the left end of the bar for more than 2 seconds,
the corresponding cooking zone will switch off.
62
or
.
Selecting the
power level
directly
Werbung
