Using the timer function
4. Using the timer function
4.1 Setting the timer with automatic switch-off
of one or more cooking zone(s)
• Select the desired cooking zone with the corresponding
selection control.
• Then touch the timer key.
The timer display will show "30" (30 min).
• As long as the tens digit is flashing, you can adjust it
by using the slider.
After 3 seconds without further input or touching the timer
keay again, the tens digit setting is accepted and the ones digit
starts flashing. Adjust it with the slider as well.
• After 3 seconds without further input,
the set time is automatically confirmed.
The countdown starts and the timer display
shows the remaining time with a flashing dot.
To mark the selected zone, a dot under the
corresponding power display lights up.
• After the set time has expired,
the corresponding cooking zone is automatically switched off.
Note: Other previously set cooking zones remain unaffected
by the timer and remain in operation.
Canceling and changing the time setting
• To cancel the time setting, touch the timer key again.
The remaining time display disappears (display: "--")
and the timer is canceled.
• If you want to change the set time after setting the timer,
you have to cancel the setting and start again with the first step
of the setting.
67