Personalizing Temperature Level Values For The Cooling Program; Personalizing The Daily Temperature Program - Bpt TH 400 Gebrauchsanweisung

6.6 - Repeat steps 6.4 and 6.5 to
vary the values of the other tempe-
rature levels.
The reappearance of the whole
daily program graph confirms the
end of the temperature level pro-
gramming sequence.
After 10 s without any further ope-
rations being performed, the ther-
mostat abandons the procedure,
retaining the most recent settings.
6.7 - Close the front panel on the
thermostat.
1 2 3 4 5 6 7
ON
T3
T2
T1
0 4 8 12 16 20
16
GB
7 - PERSONALIZING
TEMPERATURE LEVEL
VALUES FOR THE
COOLING PROGRAM
Open the front panel on the ther-
mostat. After selecting the
(cooling) operating mode, set the
temperature levels required as
explained from step 6.3 above
onwards.
Close the front panel on the ther-
mostat.
8 - PERSONALIZING
THE DAILY TEMPERATURE
PROGRAM
8.1 - Open the front panel on the
thermostat.
0
23
8.2 - Using the 1÷7 button, bring
1
the indicator round to the 1
7
C
(Monday) position, figure 38.
8.3 - Using the
Fig. 38
tons, move the flashing bar
0 hours on the daily program
graph, figure 39.
Note. When you move away from
the actual time, the information on
the display changes as follows:
a) The clock shows the time indica-
ted by the flashing of the bar
The dots between the hours and
minutes stop flashing.
b) The temperature reading shows
the value of the temperature level
selected for the time indicated by
the flashing bar.
8.4 - Using the
figure 40, select the required tem-
perature level; then press the
1 2 3 4 5 6 7
T3
T2
T1
0 4 8
0÷23 but-
to
or button,
ON
12 16 20
Fig. 39
.
0
23
1
7
C