Bpt TH 400 Gebrauchsanweisung Seite 6

21 T For programming the
temperature levels (T1
to T3) and the tempe-
rature threshold, and
for viewing he tempe-
rature levels.
22 Selection the COOLING
program (
HEATING program (
23 0÷23 Moves the time in the
daily program graph
backwards.
24 0÷23 Moves the time in the
daily program graph
forwards.
25 1÷7 Selection the day of the
week.
26 C Copy program.
6
GB
THERMOPROGRAM
TH400
The TH400 THERMOPROGRAM
programmable thermostat is desi-
gned to ensure ideal temperature
conditions at all hours of the day
and every day of the week.
) or the
It takes only minutes to install,
).
because it is connected to the hea-
ting/cooling plant simply by means
of two wires.
Three LR03 type AAA 1.5V alkaline
batteries are used to power the
THERMOPROGRAM for over a year.
Once it has been installed, it is
immediately ready to operate with
its permanently-memorized stan-
dard program.
To suit individual needs, the pro-
gram can be adjusted at will, set-
ting the required temperatures for
the various times of the day and
week.
The THERMOPROGRAM is extre-
mely easy to program, even before
it is installed; a spacious display
facilitates this operation, since you
can "see" and change all the infor-
mation and program settings at
any time.
The temperature threshold can be
set at values between ± 0.1 °C and
± 0.9 °C.
The THERMOPROGRAM
generally control both heating and
cooling plants and it can replace
any previous on/off thermostat.
can