Werbung
Verfügbare Sprachen
Verfügbare Sprachen
B
B
B
B
EARTH ANCHOR
Included with the spotlight is an earth anchor, which can be
attached to the mounting bracket with the help of the included
Allen screw. A 6 mm hex tool (not included) is required to attach
the earth anchor to the mounting bracket.
SETUP AND INSTALLATION
Thanks to the wide stand or mounting bracket, the spotlight can be placed in a suitable location on a level surface. Install on a crossbeam
using a traverse clamp that is attached to the mounting bracket (A). Suitable traverse clamps are available as needed. Ensure that the
connections are tight and secure the spotlight to the dedicated fixing eyelet using the integrated safety eyebolt. There is a recess on the
housing edge between the device housing and the glare protection ring. During installation, please ensure that this recess is positioned in
such a way that water can flow freely from the front glass through this recess.
Important safety information: Overhead mounting requires extensive experience, including the calculation of the load limit
values of the installation material and regular safety inspection of all installation materials and spotlights. If you do not have
these qualifications, do not attempt to carry out the installation yourself; contact a professional company.
A
A
11
Werbung
