Cameo Q-SPOT 40i Bedienungsanleitung Seite 5

CONNECTIONS, CONTROL AND DISPLAY ELEMENTS
8
7
POWER IN
1
IP65 cable connector to supply power to the device. A suitable power cable, with CEE 7/7 plug, is included in delivery.
POWER OUT
2
IP65 cable connector to supply power to additional Cameo spotlights. Carefully close the socket with the help of the appropriate sealing cap
when the connection is not being used (sealing cap included in delivery).
DMX IN
3
Male IP65 3-pin cable connector to connect a DMX control device (e.g. DMX console). A suitable adapter cable, on a 3-pin XLR plug, is
included in delivery. Carefully close the socket with the help of the appropriate sealing cap when the connection is not being used (sealing
cap included in delivery).
DMX OUT
4
Female IP65 3-pin cable connector for transmitting the control signal (DMX, master/slave). Carefully close the socket with the help of the
appropriate sealing cap when the connection is not being used (sealing cap included in delivery).
6
1
3
5
9
4
8
2
5