Cameo Q-SPOT 40i Bedienungsanleitung Seite 9

Dimmer curves
Linear
DMX value
SYSTEM INFORMATION (System Info)
To view various system information, press MODE until the top line of the display shows "Menu". Now select the "System Info" option
(bottom line) using UP and DOWN and then press ENTER. Use the UP and DOWN buttons again to select the desired parameter, then press
ENTER to view the information or UP and DOWN to adjust (confirm with ENTER).
System info
Firmware = Displays the software version
Temperature = Displays the LED temperature in Celsius
or Fahrenheit
Op.Hours = Displays the operating time in hours
IR REMOTE CONTROL (OPTIONAL)
Activate infrared remote control in system settings under "IR Remote" (IR Remote On) Now aim the infrared remote control
directly at the infrared sensor (line of sight) built into the front of the spotlight. The maximum range is approx. 8 meters.
Infrared remote control is deactivated in the DMX mode and slave mode.
BL / ON/OFF (Blackout)
The BL button switches off the LED, regardless of which operating mode is activated via the remote control. Press the BL button again to
reactivate the previously selected mode.
SP / SPEED
11-step speed adjustment for the operating modes "Auto Jump", "Auto Fade", and "Auto Program" First press the SP button and select the
desired speed by using the + and - buttons. Level 1 allows the color change sequence to progress slowly, pressing it again activates level 2
with a faster change sequence, and this is followed by levels 3 to 11, where level 11 is the fastest sequence of color changes.
Exponential Logarithmic
DMX value DMX value
S-curve
DMX value
V1.xx Press ENTER to display information
Temperature LED Display temperature by pressing ENTER
Unit F/C Displays the temperature in Celsius or Fahrenheit
xxxxh Press ENTER to display information
9