ChiQ MRF-262 Benutzerhandbuch Seite 11

Pin shaft
9. Install the lower hinge on the left side of the
cabinet.
10. Remove the screw that secures the door stop
from the bottom right of the freezer
compartment door, then remove the door stop
and install to the bottom left side.
Door stop
11. Install the freezer compartment door.
12. Move the door bushing from the top right
side of the freezer door to the top left side of the
door. And move the left hole cover to the right
side.
13. Remove the center hinge screw hole plug on
the left side of the cabinet, then install in the
screw holes on the right side of the cabinet.
14. Install the centre hinge to the left side with
the two screws you removed previously.
Freezer compartment door
Centre hinge
Door bushing
Screws
Hole cover
11
15. Remove the screw that secures the door stop
from the bottom right of the refrigerator
compartment door, then remove the door stop
and install to the bottom left side.
Refrigerator door
Door stop
16. Install the Refrigerator compartment door.
17. Move the door bushing from the top right
side of the Refrigerator door to the top left side of
the door. And move the left hole cover to the
right side.
Door bushing
18. Remove the hole cover from the top left side
of the cabinet and secures the cover on the top
right side of the cabinet.
Hinge screw
hole cover
19. Secure the upper hinge to the top left side of
the cabinet with the three screws you removed
previously. Before you tighten the upper hinge
screws, make sure that the top of the door is level
with the cabinet and that the rubber gasket
makes a good seal. Screw hole plug
20. Install the hinge cover over the hinge on the
top left side of the cabinet.
Hinge cover
Screws
Upper hinge
Hole cover