Cleaning And Maintenance - MPM MOD-52 Bedienungsanleitung

EN
while holding the flange with the inlet opening directed upwards. Install new dust bag.
You can purchase spare dust bags.
AIR FILTER CLEANING AND REPLACEMENT
Normal use of the vacuum cleaner requires periodical replacement or cleaning of the air
filter, which protects the motor from the side of the dust bag, and the air outlet filter. For
this purpose, disconnect the appliance from the power supply and detach the suction
pipe.
1. Release the latch in the cover (10), remove the cover and then remove the filters (11), (12), (13).
2. Remove the motor filter (22). You will access the filter by lifting the cover (5) and removing the dust
bag (14). Remove the filter element (22).
3. Clean the HEPA filter element (12) of dust. The HEPA filter element must be perfectly dry before
installing it again. Before closing the cover (10), make sure that the HEPA filter element is aligned.
Do not wash the HEPA filter element.
4. Wash filter cartridges (11), (13), (22) under running and cool water. Dry the filters thoroughly after
washing.
5. Cartridges should be cleaned every month or more frequently (depending on the usage). If a car-
tridge is too contaminated or damaged, replace it with a new one.
6. When installing the filter elements, carefully align them in the housing and the vacuum cleaner.
CAUTION: THE FILTER CARTRIDGE BEING MOUNTED MUST BE COMPLETELY DRY.
MOUNTING A WET FILTER MAY CAUSE AN ELECTRIC SHOCK.

CLEANING AND MAINTENANCE

1. Periodically clean the vacuum cleaner housing and other external elements with a damp cloth. This
will allow maintaining good appearance of the appliance.
2. For this purpose, do not use sharp objects or any strong detergents (e.g. solvents), as this will cause
permanent damage to the vacuum cleaner housing.
3. For air filters and dust bag, follow the above instructions.
11