Werbung
Verfügbare Sprachen
Verfügbare Sprachen
OPERATING INSTRUCTIONS
Using the product
Press "+" button to enter the first hour to see/modify.
Use "+" and "-" buttons to enter each hour of day
1 and see/modify the working temperature of each
of them.
Having modified the temperature for each of the 23
hours of Day 1, press further "+" button to enter the
modification mode of Day 2.
Once the last day (Day 7) has been set, press "+"
button to end the program sequence.
"OK" will appear on the display for 5 second, con-
firming that the Program sequence has been carried
out successfully.
System is now set to adjust the temperature according
to the new adjustment of program P1.
N.B.:
- You can abort the display/modification sequence anytime, deleting any settings that have not been saved, just by pressing
"Stand-By" button;
- Restoring the default settings will delete every P1 Program previously created (see paragraph 6.3);
- If no button is pressed within 90 sec. during the Program setting process, the result will be the cancellation of the display/modi-
fication procedure and will restore back the factory default settings;
- During the programmation process, the heating elements will automatically switch to Stand-by mode, and the radiator does not
heat.
Press "M" button to choose the wished temperature
level among Comfort, Eco or Frost Free:
The displayed temperature once you've selected a
specific hour of the day, is the one currently set on
the P1 Program.
The hour displayed always indicates the starting
point. For example: when H 23 is displayed the mod-
ification involves the period of time between 23:00
and 00:00.
Press "+" button to diplay/modify the working tem-
perature of each hour of Day 2, as descrive for Day 1.
You can set automatically the same program of Day
1 on Day 2 by holding the "F" button and pressing
"+" button.
Note: you are allowed to copy and paste the same
daily program ONLY WHEN the number of the day you
wish to adjust is displayed (as showed in the picture),
BUT NOT when the hour is displayed.
END will appear on the display. A further pression
of "+" button will allow you to confirm the adjusted
program.
Note: it is possible to exit any time from the program
sequence, without displaying every hour until Day 7.
To do so, just hold "F" button and press "-" button.
27
Werbung
