Werbung
Verfügbare Sprachen
Verfügbare Sprachen
OPERATING INSTRUCTIONS
Using the product
6.
Using the product
6.1
Description of controls
A – Switch on/Stand-by
B – Operating mode
C – Special functions
D – Increase / Activate
E – Decrease / Deactivate
F – Display
G – Main switch
6.2
Operating
6.2.1 Switching on the screen
If the screen is not switched on, push any key to make
it light up.
The screen lights up and stays on for 30 seconds after
the last time any key is pushed.
6.2.2 Switching the radiator on and off
The power supply to the radiator is controlled by a two-pole electromechanical switch (G) located on the right side of the radiator.
When this switch is used the power supply to the electronic board is also switched off and, as a result, all the parameters saved are
lost after about 30 minutes, and the default settings are reinstated.
We recommend only using this switch if the radiator is not to be used for a long period of time, and to rather use the Switch on / Stand
by button (A) for switching off for short periods, in order to avoid losing the settings saved.
When the radiator is switched on using the main
switch on its side, the display lights up and the stand-
by symbol is displayed.
To switch on the radiator, push the Switch on / Stand-
by key.
To switch off the radiator, hold down the Switch on /
Stand-by key for at least 3 seconds.
When the screen is switched off, the first time any key
is pushed the screen lights up without activating the
function controlled by the key pushed.
The radiator always comes on in comfort mode. If the
radiator is new or the power supply has been off for
more than 30 minutes, the comfort temperature is at
the default value of 19°C.
Switching the radiator off using the rocking switch on
its side for more than 30 minutes results in the loss of
all data saved (date, time, temperature setting, etc.).
23
Werbung
