Repair; Returning The Device; Cleaning; Disposal - Stahl 8175 Serie Betriebsanleitung

10.3 Repair

10.4 Returning the device

Use the "Service form" to return the device if repair or service is required. On the
website "www.stahl-ex.com" under "Downloads > Customer service":
 Download the service form.
 Fill in the service form.
 Send the device along with the service form in the original packaging to
R. STAHL Schaltgeräte GmbH.
11

Cleaning

To avoid electrostatic charging, the devices located in hazardous areas may only be
cleaned using a damp cloth.
 When cleaning with a damp cloth, use water or mild, non-abrasive, non-scratching
cleaning agents.
 Never use aggressive detergents or solvents.
12

Disposal

Observe the national waste disposal regulations.
13

Accessories and spare parts

Malfunction or damage to the device due to the use of non-original components.
Non-compliance may lead to material damage!
 Use only original accessories and spare parts from R. STAHL Schaltgeräte
GmbH.
253579 / 8175601300
2017-06-30·BA00·III·en 01
Explosion hazard due to improper repair!
Non-compliance results in severe or fatal injuries.
 Repair work on the devices must be performed only by
R.STAHL Schaltgeräte GmbH.
For accessories and spare parts, see the data sheet on our
homepage
www.stahl-ex.com.
DANGER
NOTICE
Cable entry
8175
11