Oerlikon CITOSTEEL III 320C Betrieb Und Wartung Seite 20

5.5. WEAR PARTS
The list below contains wear parts of the CITOSTEEL III 320C / CITOPULS III 320C that can be directly purchased from your local provider.
Wear parts for wire guide
0,6 / 0,8
0,9 / 1,2
STEEL
Stainless 1,0 / 1,2
STEEL
1,2 / 1,6
1,4 / 1,6
0,9 / 1,2
FLUX-
1,2 / 1,6
CORED WIRE
1,4 / 1,6
1,0 / 1,2
LIGHT
ALLOYS 1,2 / 1,6
Possible use of steel rollers ALU with steel wire and coated wire.
Mounting roller
The mounting of the rollers on the deck requires an adapter réf. W000277338.
20
REFERENCE
W000373703 DUST FILTER
W000278018 LOT OF 2 SCREWS FOR ROLLER
W000277338 ROLLER ADAPTOR
INPUT
ADAPTATOR
WIRE GUIDE
Plastic
W000277338
W000277333
W000277333 W000277338
DESIGNATION
INTERMEDIATE
ROLLER
WIRE GUIDE
W000305125
W000277008
W000267599 W000277334
W000305126
W000277009
W000277010
W000266330 W000277334
W000277011
ALUKIT W000277622
ALUKIT W000277623
CITOSTEEL III 320C / CITOPULS III 320C
EN
OUTPUT
WIRE GUIDE
W000277335
W000277335 W000277336
W000277336
W000277335
W000277335 W000277336
W000277336