Werbung
Verfügbare Sprachen
Verfügbare Sprachen
OBJ_BUCH-2165-003.book Page 15 Thursday, March 16, 2017 3:22 PM
Do not use this tool as a drill. Tools equipped with shut-
off clutches are not designed for drilling applications. The
clutch can shut off automatically and without warning.
Do not open the battery. Danger of short-circuiting.
Protect the battery against heat, e. g., against
continuous intense sunlight, fire, water, and
moisture. Danger of explosion.
In case of damage and improper use of the battery,
vapours may be emitted. Ventilate the area and seek
medical help in case of complaints. The vapours can irri-
tate the respiratory system.
Use the battery only in conjunction with your Bosch
product. This measure alone protects the battery against
dangerous overload.
The battery can be damaged by pointed objects such as
nails or screwdrivers or by force applied externally. An
internal short circuit can occur and the battery can burn,
smoke, explode or overheat.
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
Intended Use
The power tool is intended for screwing in and loosening
bolts/screws, nuts and other threaded fasteners in the speci-
fied dimension and performance range.
This power tool is not intended for use as a drill.
The light of this power tool is intended to illuminate the power
tool's direct area of working operation and is not suitable for
household room illumination.
Technical Data
Industrial Cordless Angle Wrench EXACT ION
Article number 3 602 D94 ....
Rated voltage
Torque for hard/soft screwdriving application according
A)
to ISO 5393
A)
No-load speed n
0
Weight according to EPTA-Procedure 01:2014
Degree of protection
A)
measured with Bosch angled drive head
* Limited performance at temperatures <0 °C
Bosch Power Tools
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Tool bit*
2 Tool holder*
3 Angled drive head*
4 Spanner flats on the angled head flange*
5 Spanner flats on the sleeve nut
6 Worklight
7 Torque selector switch
8 On/Off switch
9 Rotational direction switch
10 Battery charge-control indicator
11 LED indicator, tightening control
12 Battery pack*
13 Battery unlocking button*
14 Handle (insulated gripping surface)
15 Utility clip*
16 Fastening slots for utility clip
17 LED holder
18 Marking ring
19 Snap ring
20 Cavity in the housing shell
21 Open-end spanner, size 27 mm*
22 Open-end spanner, size 22 mm*
23 Quick-change chuck
24 Adjustment tool
25 Hex key*
26 Adjustment disc
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
6-1500 WK 8-1100 WK 12-700 WK 12-450 WK
... 406
V=
18
Nm
2–8
-1
min
105–1050
A)
kg
1.5 - 2.0
IP 20
English | 15
... 407
... 408
... 409
18
18
2–11
2–16
110–750
70–500
45–320
1.5 - 2.0
1.5 - 2.0
1.5 - 2.0
IP 20
IP 20
1 609 92A 3U1 | (16.3.17)
18
2–16
IP 20
Werbung
