5. MAINTENANCE AND CLEANING
WARNING!
•
RISK OF BURNING! Allow the appliance to cool completely after use before touching it. The surface
of the infrared panel can become hot.
•
Never use aggressive or abrasive cleaners, white spirit, detergents, chemically impregnated wipes,
alcohol-based cleaners or other cleaning solutions. These can damage the housing and appliance.
•
Never spray the appliance and make sure no water gets into it. Do not use steam cleaner to clean
the appliance.
•
Never immerse the appliance in water or other liquids.
5.1. Cleaning
Clean and dry the appliance if necessary. The frequency of cleaning depends on the use and environment in which the
appliance is used.
To clean the appliance after use:
1. Switch the appliance off with the power button and remove the plug
2. Allow the appliance to cool down completely.
3. Clean the appliance with a clean, slightly damp and lint-free cloth.
ATTENTION! Make sure that no water enters the appliance.
4. Dry the appliance with a dry, lint-free cloth.
5.2. Replacing the battery in the remote control
The remote control uses two AAA batteries. Do not use any other batteries.
To replace the batteries:
1. Hold the remote control so that the buttons face downwards.
2. Lightly press the pipe indication and slide the battery cover
3. Remove the old batteries.
4. Insert the new batteries into the battery compartment recess.
ATTENTION!
The orientation of the positive (+) and negative (−) terminals of the battery must correspond to the + and −
on the battery compartment.
5. Slide the battery cover
ATTENTION!
If the remote control is not used for a long time, remove the batteries to prevent leakage and damage.
1
USER MANUAL
a
back into the remote control.
2
3
a
E
from the socket.
a
in the direction indicated by the arrow.
4
5
a
55