FUAVE Reykjavik 700 Bedienungsanleitung Seite 44

• Make sure the control panel and other
controls of the appliance cannot be
reached from the bath or shower.
• The socket to be used supplies the
voltage on the appliance's type plate
(230V~50Hz).
• The power socket can be reached with the
plug and the power cable is not stretched.
2. Mount the appliance to the standard:
A. Place the spacers
NOTE
Note the position of the supports: the
vertical holes are located on the inside.
B. Secure the spacers
spacers P.
C. Remove the lower two fixing screws
infrared panel A.
ATTENTION!
Keep the fixing screws on a wall
for the possible installation of the
infrared panel to a wall.
44 FUAVE Reykjavik 700/900
K in the supports J.
K with the four supplied screws for the
C from the
J
K
P
A
J
P
K
C