Indications On The Screen; Connecting The Remote Control To The Appliance - Fuave Reykjavik 700 Bedienungsanleitung

4.7.2. Indications on the screen

1 2 3
Image E
1
Wireless connection indicator
(to indicate a connection to the infrared panel).
2
ROOM indicator (to indicate that room temperature
is displayed).
3 SET indicator (to indicate that the set temperature is
shown).

4.7.3. Connecting the remote control to the appliance

To operate the appliance via the remote control, the remote control provided must be connected to the wireless receiver.
To connect the remote control to the appliance:
1. Insert the appliance's plug into the socket.
2. Turn the appliance on with the power button G.
3. Press the M button on the control panel
appliance is in connection mode.
NOTE
• If no connection is made within ten minutes, the wireless connection indicator stops flashing and the
connection mode is no longer active. In that case, follow step 3 to try to connect again.
• It is possible to connect a remote control to multiple infrared panels equipped with a wireless
receiver. To do this, put all infrared panels that need to be connected in the connection mode.
4. Press the power button of the remote control to set it to OFF. The screen displays OFF.
5. At the same time, press the power button and the
buttons for three seconds. The screen shows PAr and the wireless connection indicator flashes. The remote control
is in connection mode. The appliance and remote control connect automatically.
NOTE
When the appliance is connected to the remote control, the wireless connection indicator lights up
continuously and the remote control screen shows OFF.
6. If desired, turn the appliance off (see 'Turning the appliance on and off').
NOTE
The connection to the remote control is remembered, even when the plug is removed from the socket.
52 FUAVE Reykjavik 700/900
4 5
6
7
8
H twice. The wireless connection indicator is flashing and the
4
Child lock indicator
5
Heating indicator
6
Frost protection indicator
7 Sudden drop in temperature indicator
8 Temperature indication
+
button of the remote control and hold down the