FUAVE Reykjavik 700 Bedienungsanleitung Seite 47

4. Place the wall plugs
bracket L with the screws for the wall bracket Q.
5. Hang the infrared panel
screws C in the holes of the wall bracket L.
ATTENTION!
The fixing screws should protrude
approximately 0.5 cm from the infrared
panel. Make sure that the heads of the
fixing screws are completely flush in the
wall bracket.
6. Turn the lock D
into a vertical position so that the
infrared panel A is clamped onto the wall
bracket L.
7. Place the batteries in the remote control (see 'Replacing the batteries in the remote control').
8. Fully roll off the power cable of the appliance and lay the power cable so that it cannot touch hot parts of the
appliance.
The appliance is now ready for use. Insert the plug in the socket. Continue with the 'Connecting the remote
control to the appliance' section.
USER MANUAL
R in the drill holes and attach the wall
A with the fixing
L
O
P
L A
A
L
L
L
c
D
47