Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN-4
2.
INSTALLATION
2.1
Unpacking
Carefully remove your centrifuge and each of its components from the package. The included components vary
depending on the centrifuge model (see table below). Save the packaging to ensure safe storage and transport.
The instruction manual must always be kept with the centrifuge!
Rotor(s) / Accessories will be packed separately.
WARNING: Lifting Hazard. The FC5515 weighs approximately 17 kg (44 lb). The FC5515R
weighs approximately 35 kg (77 lb). Single person lift could cause injury. Use assistance
when lifting or moving the equipment.
It is recommend that two or more people should lift the FC5515 and three or more people should lift
the FC5515R. Please refer to section 8.3 for details about how to lift it out of the packaging.
2.1.1
Delivery package for Frontier
2.1.2
Delivery package for Frontier
2.2
Selecting the Location
NOTE!
Avoid excessive vibrations, heat sources, air current, or rapid temperature changes.
The centrifuge should be installed on an even, solid and level surface, if possible on a laboratory cabinet / table
or some other solid vibration free surface.
During centrifugation, the centrifuge must be placed in a way, that there is a minimum space of 30 cm on each
side of the unit according to the standards EN 61010-2-020.
Do not place the centrifuge next to a window or a heater, where it could be exposed to excessive heat, as the
performance of the unit is based on an ambient temperature of 23 ° C.
TM
FC5515
Quantity
1
1
1
1
1
TM
FC5515R
Quantity
1
1
1
1
1
TM
Frontier
Description
Centrifuge FC5515
Power Cable
Warranty Card
Instruction Manual
Rotor Key
Description
Centrifuge FC5515R
Power Cable
Warranty Card
Instruction Manual
Rotor Key
Centrifuge FC5515/FC5515R
Werbung
