cecotec Cumbia CREMMAET COMPACTCCINO BLACK Bedienungsanleitung Seite 50

ENGLISH
Components
Brewing unit
Drip tray and
waste container
Water tank
Coffee bean
container/grinder
Ground coffee
groove
Descaling
A. Pour the descalcifier into a container with clean water and wait for it to dissolve
completely.
B. Press and hold the menu icon and the standby mode will display the descaling icon.
C. Take out the water tank, pour the descaling product into it and add clean water until the
tank is completely full.
D. Press the OK icon to start descaling.
E. Once emptied, remove the water tank, and add clean water.
Press OK icon again and the machine will start the washing cycle.
F.
G. After the washing cycle has finished, the machine will return to the standby mode.
50
Maintenance
Remove the brewing unit and wash it under running water from
the top, remove the coffee grounds from the surface of the
plunger filter. Clean the processing unit by hand every 3 days.
Do not wipe lubricating oil from the bottom and centre of the
processing unit. Do not wash it in the dishwasher.
Remove the drip tray and the waste container after each use,
rinse under running water and wipe clean with a cloth.
Clean them at least every two days.
Rinse the tank under running water every 3 days.
Clean the coffee bean container weekly. Use a soft, dry cloth to
wipe oil/coffee grounds from the inside.
If a large amount of coffee oil has remained in the coffee bean
tank, it means that a large amount of oil could be inside the
grinder: clean it.
To clean the bean container and the grinder, you can use a
grinder cleaner for coffee machines: place the cleaner inside the
container and brew an espresso with the maximum amount of
coffee.
Then remove the brewing unit and manually clean the residues
inside.
Open the right panel, remove the brewing unit, and clean the
ground coffee channel with a soft cloth on a weekly basis.