cecotec Cumbia CREMMAET COMPACTCCINO BLACK Bedienungsanleitung Seite 48

ENGLISH
Menu and settings
In standby mode, press and hold the menu icon for 3 seconds to access the settings.
Temperature settings:
- After entering the menu, press the "MENU" icon to enter the temperature settings, you
can press "+" or "-" to adjust the coffee temperature.
- Automatic shut-off setting.
- After entering the menu, press "MENU" twice to enter the automatic shut-off setting. You
can press "+" or "-" to select the time, it can be set to 0.5h, 1h, 2h.... until 24h.
Start-up settings
After entering the menu, press the "MENU" icon 3 times to enter the start-up settings, this
function is only for professionals or customer service staff.
Manufacturing information
After entering the menu, click on the "MENU" icon 5 times and you will be able to check the
manufacturing information such as date and batch number.
Warnings and cautions
1. Empty coffee bean container
2. When the tank icon lights up, it means that the bean container is empty. Fill up the tank.
3. Double coffee
4. When the double coffee icon "x2" lights up, the double coffee function is activated. The
machine will brew two coffees at the same time with this function.
5. The machine will not brew the second coffee if the bean container runs empty during the
preparation of the first coffee.
6. Open panel
7. When the side cover icon lights up, it means that the right-side cover is open: close it.
8. Empty water tank
9. When the water tank icon lights up, it means that the water tank is empty or low on
water: fill it up.
10. Pressing unit not installed
11. When the pressing unit symbol lights up, it means that the pressing unit is not installed:
install it.
12. Coffee residues tank
13. When the waste-holding tank icon lights up, it means that the waste-holding tank is
not properly positioned or installed, or that it is full and needs to be emptied. Empty the
coffee grounds container every 8 cups of coffee.
14. Descaling
15. When the descaling icon lights up, it means that the machine needs to be descaled. See
the "descaling" instructions in the "Cleaning and maintenance" section.
48