Beko BHCB66641BBBHS Bedienungsanleitung Seite 6

• Make sure that the power
cable is not jammed while
putting the product to its place
after assembly or cleaning.
• Do not plug your hood in until
it is mounted.
• Use original cable only. Do not
use cut or damaged cables.
• Do not use an extension cord
or multi-plug to operate your
product.
• Contact the authorized service
centre or importer to use the
approved adapter in cases
where the use of a converter
adapter (for plug type) is ne-
cessary.
• Contact the importer or the
authorized service centre if the
length of the power line is in-
adequate.
• Portable power sources or
multiple plugs may overheat
and catch fire. Keep multiple
plugs and portable power
sources away from the
product.
• If the power cable is damaged,
it must be replaced by the
manufacturer, an authorized
service or a person to be spe-
cified by the importer com-
pany in order to prevent pos-
sible dangers.
• If your product has plug, do
not make electrical connec-
tions by disconnecting the
plug during installation. Con-
nections made by cutting off
render the product warranty
void and pose a danger to user
safety.
If your product has a power
cable and plug:
• Never put the product plug
into a broken, loose, or out-of-
socket plug. Make sure the
plug is fully inserted into the
socket. Otherwise the connec-
tions may overheat and cause
a fire.
• Avoid inserting the device into
plugs that are greasy, unclean,
or potentially exposed to wa-
ter (such as those near a
worktop where water may es-
cape). Otherwise there is a risk
of short circuit and electrocu-
tion.
• Never touch the plug with wet
hands!
• Pull the plug out of the socket
using the plug's body rather
than the cord itself.
1.4 Transportation
Safety
• Disconnect the product from
the mains before transporting
the product.
• The product is heavy, carry the
product with at least two
people.
EN / 6
EN
DE
FR
NL