Werbung
3.
Befestigen Sie die Trittflächenschienen (8/9) an
der Tretkurbel (15/16) mit 2 x Pedalschrauben
(82), 2 x Wellenscheiben (74), 2 x Federringen
(90), 2 x (91) und 2 x runden Endkappen (92).
Schieben Sie die Rotationsachse (12) in die
Konsolensäule (2).
Note
Ensure that the Shouldered
Bolts are fully tight before finally
securing the Nylon Lock nuts.
One Bolt is supplied with a
RIGHT HAND THREAD for the
RIGHT HAND SIDE and must
be fitted by turning CLOCKWISE.
The other Bolt is supplied with a
LEFT HAND THREAD for the LEFT
HAND SIDE and must be fitted by
turning ANTI-CLOCKWISE.
82L
74
90
92
Aufbau / Assembly
12
8
15L
91
15R
91
Connect the Footplate Support Bars (8L/9R) to the
Crank Arms (15L/16R) using 1 x Shouldered Bolt
(82L), 1 x Wave Washers (74) through the Footplate
Bar Pivot Bracket and into the Crank Arm. Then fit
1 x Large Spring Washers (90), 1 x Large Nylon
Lock Nut (91) for each side to secure the complete
assembly. Cap the Large Nylon Lock nuts with
2 x Large Round Caps (92) for each side.
(SEE NOTE) and 2 x Large Round Caps (92). Slide the
Rotation Rod (12) into the Handlebar Upright (2).
55
6
2
9
92
90
74
82R
7
Werbung
