Parkside PDWE 8 B2 Originalbetriebsanleitung Seite 7

■ Use only original spare parts for repairs.
Non-original spare parts can cause serious
damage.
■ When carrying out maintenance, adjustment
and repair work, always disconnect the
compressed air maintenance unit from the
compressed air supply first.
■ Modifications to the compressed air mainte-
nance unit are prohibited.
■ Do not use the compressed air maintenance unit
unless it is in perfect condition. If in doubt,
consult a specialist before using the appliance.
■ Have all repairs carried out by qualified profes-
sionals.
User safety
■ Before each application, test the compressed
air tool you are using.
Do not use the compressed air maintenance unit
with a higher operating pressure than that indi-
cated in the technical data. Before connecting
your air tools to the compressed air mainte-
nance unit, make sure they are properly and
securely connected.
■ 4 │ GB │ IE
Prohibited areas of application
■ Do not use this compressed air maintenance
unit in potentially explosive atmospheres. Avoid
working in environments containing substances
such as flammable gases, liquids, and paint or
dust mists. These substances can be ignited by
very hot surfaces on the compressed air unit.
Important note
■ Do not use the compressed air maintenance unit
in conjunction with compressed air appliances
that are suitable for use with processed
compressed air (e.g. grease guns, sandblasting
devices, tyre inflators, etc.).
Before use
Installation
■ NOTE: To minimise potential injury or damage,
the compressed air maintenance unit must be
mounted on a suitable wall prior to initial opera-
tion. Ensure the compressed air maintenance
unit is mounted stably and horizontally.
For wall mounting, use the wall bracket 5 for
■
marking on the wall and for screwing with the
supplied mounting material (see scope of
delivery, see fig. D).
(fig. D)
PDWE 8 B2