STIEBEL ELTRON WPM Bedienungsanleitung Seite 25

OPeRATION
Menu
„SETTINGS
Here you can change some of the settings. Your qualified contrac-
tor can set the other parameters for you.
… „ GENERAL
… …„ TIME / DATE
… …„ SET SUMMER TIME
… ……„ DAY BEGINNING
… ……„ DAY ENDING
… …„ LANGUAGE
… …„ CONTRAST
… …„ BRIGHTNESS
… „ HEATING
… …„ HEATING CIRCUIT 1
… ……„ COMFORT TEMPERATURE
… ……„
ECO TEMPERATURE
… …„ HEATING CIRCUIT 2
… ……„ COMFORT TEMPERATURE
… ……„ ECO TEMPERATURE
… …„ HEATING CIRCUIT 3
… ……„ COMFORT TEMPERATURE
… ……„ ECO TEMPERATURE
… …„ HEATING CIRCUIT 4
… ……„ COMFORT TEMPERATURE
… ……„ ECO TEMPERATURE
… …„ HEATING CIRCUIT 5
… ……„ COMFORT TEMPERATURE
… ……„ ECO TEMPERATURE
… „ DHW
… …„ DHW TEMPERATURES
… ……„ COMFORT TEMPERATURE
… ……„ ECO TEMPERATURE
… „ COOLING
GENERAL
… „
… …„ TIME / DATE
Select TIME / DATE to set the current time, year, month and day.
f Use the Touch-Wheel to select the field you want to change.
Confirm the selection with OK.
f Use the Touch-Wheel to set the day, the month, the year or
the time. Confirm the selection with OK.
… …„ SET SUMMER TIME
Select SET SUMMER TIME, to set the summer time dates.
Summertime is factory-set to begin on 25 March and to end on
25 October.
… ……„ DAY BEGINNING
Set the beginning of summer time here.
f Use the Touch-Wheel to select the field you want to change.
Confirm the selection with OK.
f Use the Touch-Wheel to set the day or month. Confirm the
selection with OK.
www.stiebel-eltron.com
… ……„ DAY ENDING
Set the end of summer time here.
f Use the Touch-Wheel to select the field you want to change.
Confirm the selection with OK.
f Use the Touch-Wheel to set the day or month. Confirm the
selection with OK.
… …„ LANGUAGE
Select LANGUAGE to change the system language.
f Select the desired language using the Touch-Wheel. Confirm
the selection with OK.
… …„ CONTRAST
Select CONTRAST to adjust the display contrast.
f Turn the Touch-Wheel to set the desired contrast level. Con-
firm the selection with OK.
… …„ BRIGHTNESS
Select BRIGHTNESS to adjust the display brightness.
f Turn the Touch-Wheel to set the desired brightness. Confirm
the selection with OK.
… „ HEATING
… …„ HEATING CIRCUIT 1 | HEATING CIRCUIT 2 | HEATING
CIRCUIT 3 | HEATING CIRCUIT 4 |
With all heating circuit menu items, you can specify the parame-
ters independently of one another.
Note
If the WPE heat pump extension is connected, you can
specify separate values for heating circuit 4 and heating
circuit 5.
COMFORT TEMPERATURE
… ……„
Select COMFORT TEMPERATURE to set the set room temperature
for comfort mode. When the heat pump is in comfort mode (see
PROGRAMS / HEATING PROGRAM or operating mode COMFORT
MODE), the heat pump heats the heating water to the value set
here.
f Set the desired set room temperature using the Touch-
Wheel. Confirm the selection with OK.
… ……„ ECO TEMPERATURE
Select ECO TEMPERATURE to set the set room temperature for ECO
mode. When the heat pump is in ECO mode (see PROGRAMS /
HEATING PROGRAM or operating mode ECO MODE), the heat pump
heats the heating water to the value set here.
f Set the desired set room temperature using the Touch-
Wheel. Confirm the selection with OK.
HEATING CIRCUIT 5
WPM | 25