STIEBEL ELTRON WPM Bedienungsanleitung Seite 21

OPeRATION
Menu
f Set the ECO temperature under SETTINGS / DHW / DHW TEM-
PERATURES / ECO TEMPERATURE.
f Set the times under PROGRAMS / DHW PROGRAM.
4.4.5 DHW MODE
Purpose: When the heating period is over and only DHW is re-
quired (summer mode).
DHW heating takes place according to the specified seven-day pro-
gram times. The heat pump switches between comfort tempera-
ture and ECO temperature. Within the selected seven-day program
times, the heat pump heats to comfort temperature.
f Set the comfort temperature under SETTINGS / DHW / DHW
TEMPERATURES / COMFORT TEMPERATURE.
f Set the ECO temperature under SETTINGS / DHW / DHW TEM-
PERATURES / ECO TEMPERATURE.
f Set the times under PROGRAMS / DHW PROGRAM.
Frost protection is activated for heating mode.
4.4.6 EMERGENCY OPERATION
Note
If emergency mode is enabled, higher operating costs
will result because of the second heat source.
Purpose: If the heat pump can no longer function. In many cases
the heat pump switches into this operating mode automatically.
Heat pumps with second internal heat source
For heat pumps with a second internal heat source, the emer-
gency/booster heater is activated for central heating and DHW
heating.
Heat pumps with second external heat source
If the heat pump is connected to an external second heat source
and your qualified contractor has enabled the corresponding pa-
rameters (THREADED IMMERSION HEATER or BOILER), the oper-
ating mode can be selected. The external heat source then takes
over operation of the DHW or central heating function, irrespective
of the dual mode changeover point.
www.stiebel-eltron.com
5. Menu
Note
Not all appliance parameters and values are displayed in
the different menus; it depends which heat pump type
and accessories are connected.
Note
Some menu items are protected by a code and can only
be accessed and adjusted by a qualified contractor.
Note
The menu items shown in grey are visible only if the WPE
heat pump extension is connected.
5.1 Menu structure
„ INFO
… „ SYSTEM
… „ HEAT PUMP
… „ ENERGY FOOTPRINT
„ DIAGNOSIS
… „ SYSTEM STATUS
… „ HEAT PUMP STATUS
… „ HEAT PUMP ANALYSIS
… „ SYSTEM
… „ INTERNAL CALCULATION
… „ NOTIFICATIONLIST
… „ RELAY TEST SYSTEM
… „ RELAY TEST HEAT PUMP
„ PROGRAMS
… „ HEATING PROGRAM
… „ DHW PROGRAM
… „ COOLING PROGRAM
… „ PARTY PROGRAM
… „ HOLIDAY PROGRAM
… „ HEAT-UP PROGRAM
… „ PASTEURISATION PROGRAM
… „ DHW CIRCULATION PROGRAM
… SWIMMING POOL PROGRAM „
… „ SILENT PROGRAM 1
… „ SILENT PROGRAM 2
„ SETTINGS
… „ VIEW
… „ GENERAL
… „ FAVOURITES
… „ HEATING
… „ DHW
… „ HYBRID MODULE
… „ COOLING
… SWIMMING POOL „
… DIFFERENTIAL CONTROLLER 1 „
… DIFFERENTIAL CONTROLLER 2 „
… THERMOSTAT FUNCTION 1 „
… THERMOSTAT FUNCTION 2 „
„ COMMISSIONING
… „ SOURCE
… „ CHARGING PUMP CONTROL
… „ HEATING
WPM | 21