STIEBEL ELTRON WPM Bedienungsanleitung Seite 18

OPeRATION
Operation
Activation
If the Touch-Wheel and keys are not used for 5 minutes, the
programming unit is locked.
WEDNESDAY 12. APR 17
OUTSIDE TEMPERATURE
To activate please
ACTUAL WW TEMPERATURE
press MENU
ACTUAL RETURN TEMPERATURE
for 3 seconds.
ECO MODE
f Press MENU for three seconds to activate the programming
unit.
Selection indicator
A selection indicator shows the current position within the menu
structure at all times. The currently selected menu item is indi-
cated by a dark background. The current menu level is indicated
at the top of the display.
4.1.2 Touch-Wheel
Circular movement
Move one finger clockwise over the Touch-Wheel to move the
selection indicator downwards or to the right in the list, depend-
ing on how the menu items are arranged. Circling anti-clockwise
moves the selection indicator to the left or upwards in the list.
Alongside navigation within the menu structure, the Touch-Wheel
is also used to set parameters. Increase the values with a clockwise
motion. Reduce the values with an anti-clockwise motion.
18 | WPM
4.1.3 Keys
10:23 TIME
27.0 °C
"MENU" key
35.0 °C
The MENU key has two functions:
28.0 °C
- From the start screen, tap on the MENU key to navigate to the
- Tapping the MENU key while in the menu structure will re-
"OK" key
The OK key has four functions:
- On the start screen, tapping the OK key will activate the
- Within the menu structure, tapping the OK key confirms the
- At the parameter level, tapping the OK key saves the current-
- At every menu level, you will see the entry BACK. Selecting
If there is no user action for over 5 minutes (no circular motion and
neither MENU nor OK tapped), the programming unit display auto-
matically jumps back from the menu structure to the start screen.
Parameter changes made before this which had not yet been con-
firmed with OK are lost. The parameters retain the values previ-
ously saved.
4.1.4 Contractor access
Note
Tap on the keys only briefly to trigger the required action.
If a key is touched for too long, the programming unit
will not respond.
first of 5 menu structure levels.
turn you to the previous menu level.
required operating mode previously selected with the Touch-
Wheel (see "Selecting operating modes").
selected menu item and takes you to the next menu level
down.
ly set parameter.
BACK takes you to the next higher menu level.
Note
Some menu items are protected by a code and can only
be accessed and adjusted by a qualified contractor.
www.stiebel-eltron.com