oventrop Regumat Montageanleitung Seite 15

"Sensor connection set Regumat"
1. General information
1.1 Extent of supply and contact
• 1 x Differential pressure sensor set
(Grundfos); item-No. 1357291 only
• 2 x Temperature sensor PT 1000
• 2 x Adapter G 2 x G 2 M
• 2 x Adapter NPT 1/
item-No. 1357291 only
• 2 x Connection pipe made of copper, 1 m
each; item-No. 1357291 only
• 2 x Ring gasket made of copper
• 6 x Ring gasket (AFM 34)
• 2 x Sealing plug (item-No. 1357292)
Contact address
OVENTROP GmbH & Co. KG
Paul-Oventrop-Straße 1
D-59939 Olsberg
Germany
Technical service
Phone: +49 2962 82 234
(Mo.-Fr. 7:30-16:30 h)
1.2 Important information regarding
installation instructions
These installation instructions have to be
read, understood and applied by any person
working on the "sensor connection set
Regumat".
The following principles shall apply:
Installation, initial operation, maintenance
and repair must only be carried out by a
qualified tradesman.
Before starting work, read these installation
instructions in their entirety. The safety
and warning notes are to be observed.
The installation instructions are part of the
product.
Advice for the qualified tradesman: Hand all
installation and operating instructions over
to the user of the system.
Advice for the user of the system: All
installation and operating instructions have
to be kept for later reference.
x M 8 x 1
8
1.3 Note regarding declaration of
conformity
Oventrop GmbH & Co. KG hereby declares
that the "differential pressure sensor DPS"
complies with the basic requirements and the
other relevant provisions of the relevant EC
guidelines.
The declaration of conformity can be obtained
from the manufacturer.
1.4 Storage
The product must only be stored under the
following conditions:
• Storage temperature: 5°C up to 45°C
• Do not store in open air, keep dry and free
from dust.
• Do not expose to aggressive fluids or heat
sources. Protect from direct sunlight.
Packaging material is to be disposed of in an
environmentally friendly manner.
1.5 General conditions of sales and
delivery
Oventrops general general conditions of sales
and delivery valid at the time of supply are
applicable.
1.6 Copyright and protective rights
These installation instructions are copyrighted
and are exclusively designed for persons
involved with the product.
General information
15/36