Snooze Function; Receiving Measurements Automatically - Bresser Translucidus NV Bedienungsanleitung

3.
4.
5.
6.
7.
Activate/deactivate the alarm
8.
9.
10. In normal display mode, press the [ALARM] button to

14 Snooze function

1.
2.

15 Receiving measurements automatically

Once the power supply is enabled, the base station will dis-
play the measurement readings. Readings from the remote
sensor will be displayed within 3 minutes after powering it
on.
Read the detailed manual for more information about read-
ings (see download information on page 2).
14 / 40
Digits to be set are flashing.
Press [UP] or [DOWN] button to change the value.
Press the [ALARM] button to confirm the entry and
move to the next setting.
Order of the settings: hours > minutes
Finally, press the [ALARM] button to save the settings
and exit the settings mode.
In normal display mode, press the [ALARM] button to
activate the wake-up call. The icon
In normal display mode, press the [ALARM] button
again to deactivate the wake-up call. The icon
longer displayed.
display the currently set alarm time.
When the alarm sounds, press SNZ button to activate
the snooze function. The alarm will sound again in 5
minutes.
Press any other button when the alarm sounds to inter-
rupt the alarm until the alarm time will be reached
again.
appears.
is no