Operating Functions / Operation; Replacing The Ear Pads - Beyerdynamic MMX 200 wireless Bedienungsanleitung

MMX 200 wireless

OPERATING FUNCTIONS / OPERATION

Operating functions
Switch on
Switch off
Microphone mute on/off
Augmented Mode enable/disable
Enable Bluetooth® Mode
Enable Low Latency Mode (Dongle connected)
Pair a new device via Bluetooth®
Set volume
Accept / end a call (Bluetooth® Mode)
Reject an incoming call (Bluetooth® Mode)
Play / stop music (Bluetooth® Mode)
Delete pairing list
Reset to factory settings

REPLACING THE EAR PADS

To remove the ear pad, gently turn it counter-
�
clockwise and pull it off .
To attach the new ear pad, place it onto the
�
orange housing and gently turn it clockwise
until it sits tight .
Operation
� Press and hold the on-off button for 3 sec .
� Press and hold the on-off button for 3 sec .
� Briefly press the control wheel
� Press the control wheel for approx . 2 sec .
� Briefly press the / button 3 x
� Briefly press the / button 2 x
� Press and hold the / button for 3 sec .
� Increase volume: turn the control wheel upwards
� Decrease volume: turn the control wheel downwards
� Briefly press the / button 1 x
� Press and hold the / button for 2 sec .
� Briefly press the / button 1 x
� Switch off the headset, then press and hold the on-off
button for 6 sec .
� Switch off the headset, then press and hold the on-off
button for 16 sec .
Turn counter-clockwise
and pull off .
Replace ear pad
and turn clockwise .
9