SSS Siedle BSG 650-02 Programmieranleitung Seite 9

English
Commissioning
Application
The bus control unit BSG 650-... is
the supply and control unit for max.
31 system components in one line. It
comes in a 3-grid housing for switch
panel mounting and is supplied by
the NG 602-... with 24 V DC.
Wiring diagram AS-TH-1/1
Note non-recurring address
setting in the system!
Operating elements
i i
• Buttons to enter the programming
mode for the connected bus users.
• LED for status display during
programming.
• Rotary switch for setting the
address (1-9 and A-F). "0" is not
admissible as an address.
Terminal assignment
Ta,Tb User bus cores
Sa, Sb System bus cores
Tö, Tö Relay contact door release
24V 2A
Li, Li Relay contact light
24V 2A
VC Video actuation
GND Supply for VC
Status displays
The LED at the BSG is used for displaying different system statuses:
LED flashes evenly
(system run-up)
LED flashes long on, short off,
(own BSG address incorrect)
LED flashes long on, short off,
short on, short off, long on...
(more than 31 users in the line)
LED flashes short on, long off...
(programming mode active)
LED always on
(BSG address error at other BSG)
Components
BTS 750-... Bus telephone standard
BTC 750-... Bus telephone deluxe
BT Stands in the following for standard and deluxe bus telephone
BTLM 650-... Bus door loudspeaker module
BTM 650-... Bus call button module (1-4 call buttons)
BTLE 050-... Bus custom fit door loudspeaker
BRMA 050-... Bus call button matrix
BSG 650-... Bus supply and control unit
Note non-recurring address setting in the system!
BSM 650-... Bus control module
BIM 650-... Bus interface module connects the bus intercom system with
the Vario bus
BSE 650-... Bus switching device
BEM 650-... Bus input module
BNS 750-... Bus secondary signalling unit
NG 602-... Line rectifier for one phase (max. 31 bus users)
0,3s 0,3s 0,3s 0,3s 0,3s 0,3s
2s
2s
2s
0,3s
0,3s 0,3s 0,3s 0,3s 0,3s 0,3s
0,3s
2s
0,3s 0,3s 0,3s
2s
0,3s
0,3s 0,3s 0,3s etc.
etc.
2s etc.
0,3s etc.
5