Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1. Open the refrigerator door and remove all the items on the door.
2. Remove the upper hinge cover (2). Remove the two screws (3) and remove the
upper hinge part (4).
3. Take the door up carefully and place the door on the ground with a soft surface
to prevent the surface of the door from being scratched.
4. Remove the screw hole cover (1) and transfer it to the corresponding hole on the
right, be sure to firmly press it into the hole.
5. Remove the two screws (6) at the bottom
6. Remove the lower hinge parts (5) at the bottom
7. Remove the left adjustable foot at the bottom, transfer it to the hole
corresponding to the bottom on the right.
8. Install the previously removed lower hinge parts (5) into the corresponding hole
on the left side of the bottom, and tighten the screw (6)
9. Install the left hole at the bottom of the door into the lower hinge parts and close
the door.
10. Install the previously removed upper hinge part (4) the corresponding hole
position on the left side, screw the screw (3), do not tighten it first, and tighten
the screw when the door is in the horizontal position.
11. Install the previously removed upper hinge cover (2) to the corresponding
position on the left.
C
HANGE OF THE HINGE POSITION
36
:
Werbung
