Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2. Climatic classes
Look at chap. T
of your appliance. Your appliance can be operated in rooms with relevant
room temperatures as named below.
CLIMATIC CLASS
SN
3. Installation
3.1 Site
1. Unpack the appliance carefully. Dispose of the packaging as described in chapter
waste management.
2. The accessories of your appliance can be protected from damage due to
transportation (adhesive tapes etc.). Remove such tapes very carefully. Remove
remains of such tapes with a damp cloth using lukewarm water and a mild
detergent (see also chapter
components of the back of the appliance!
3. Install the appliance in a suitable position with an adequate distance from sources
of heat and cold.
4. Check that the appliance and the power cord are not damaged.
5. Install the appliance in a dry and well-ventilated place.
6. Protect the appliance from direct sunlight.
7. The doors must open completely and without hindrance.
8. Install the appliance on a level, dry and solid floor. Check the correct installation
with a bubble level.
9. Connect the appliance to the mains properly.
10. The nameplate is inside the appliance or at the back.
Minimum distances required for proper ventilation:
Electric cookers
Oil/coal stoves
Additional cooling units
D
ECHNICAL
ATA
N
ST
T
CLEANING AND MAINTENANCE
for information about the climatic class
AMBIENT TEMPERATURE
+10
0
→+32
0
C
+16
0
→+32
0
C inner home temperature
+16
0
→+38
0
C inner home temperature
+16
0
→+43
0
C inner home temperature
31
e.g. unheated cellar
). Never remove any
Min. 3 cm
Min. 30 cm
Min. 2 cm
Werbung
