Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Basic safety instructions
CPS96D:
• Process technology and monitoring of processes with:
– Rapidly changing pH values
– High proportion of electrode poisons such as H
• Chemical processes
• Pulp and paper industry
• Contaminated media and suspended solids
– Dispersions
– Precipitation reactions
– Emulsions
2.3
Occupational safety
As the user, you are responsible for complying with the following safety conditions:
• Installation guidelines
• Local standards and regulations
• Regulations for explosion protection
2.4
Operational safety
Before commissioning the entire measuring point:
1.
Verify that all connections are correct.
2.
Ensure that electrical cables and hose connections are undamaged.
3.
Do not operate damaged products, and protect them against unintentional operation.
4.
Label damaged products as defective.
During operation:
‣
If faults cannot be rectified:
products must be taken out of service and protected against unintentional operation.
2.5
Product safety
2.5.1
State of the art
The product is designed to meet state-of-the-art safety requirements, has been tested, and
left the factory in a condition in which it is safe to operate. The relevant regulations and
European standards have been observed.
2.5.2
Transport and storage
‣
All sensors are individually tested and supplied in individual packs.
‣
They must be stored in a dry place at temperatures of between 10 and 30 °C (50 to 90 °F).
‣
The electrodes are provided with a protection cap. The cap contains a special liquid that
prevents the electrodes from drying out.
20
S
2
Memosens CPS16D/76D/96D
Endress+Hauser
Werbung
