Bullerjan Dot Handbuch Seite 34

6.3 Combustion chamber
For regular cleaning of the combustion
chamber, we recommend an ash-suction
device ( which you will find in the Bullerjan
Fixtures product line ) .
6.4 Thermotte lining
®
The interior lining consists of Thermotte
and is maintenance-free. Any soot residues
will be burned in the course of the next
preheating phase of your Bullerjan dot
enables the interior lining to maintain its
light colour. When cleaning the interior, take
care not to damage the Thermotte
6.5 Glass surfaces
Your Bullerjan dot ® is equipped with a double
glazing and a very effective window rinse.
The window rinse prevents soot deposits in
the window. If nevertheless any residue
has accumulated on the window, remove it
when the surface is cold, using glass cleaner
and a soft cloth. Never use scouring agents!
34
6.6 Platform and stove corpus
Remove any contamination on the stove
corpus or the platform with a dry, soft cloth.
® - Never use scouring agents, since these may
damage the paint.
®
® . This
lining.
®
6.7 Flue tubes
Clear the flue tubes of combustion residues
via the maintenance doors ( at least once
annually ) . The same applies to any supply
line for external combustion air.
6.8 Door mechanism
Your Bullerjan dot
locking door ( which makes it a Type 1 stove;
this type enables the connection of several
heat-producing appliances to a single flue ) .
The tension of the lock mechanism can
be set to different levels. Any adjustments
of the lock mechanism are to be performed
solely by duly authorised specialist
personnel.
is equipped with a self-
®