Panasonic CZ-ANC3 Bedienungsanleitung Seite 5

Operating
precautions
Do not locate in the following types of places.
z
y Where there is moisture, oil, or vibration/
In direct sunlight/Near heat sources/Where
condensation forms (These can cause
malfunctions.)
y Where noise occurs (This can cause
incorrect operation.)
Do not clean with benzene or thinners or
z
wipe with chemical cloths. (This can cause
discolouration or malfunction.)
y When the unit is very dirty, dampen a cloth
in a weak neutral detergent solution, wring
thoroughly, and wipe. Wipe with a dry cloth
afterwards.
Features
„Number of connectable units
A maximum of 16 groups and 64 indoor units
can be connected to one ON/OFF controller.
„Control function
ON/OFF (individual or all at once)
„Start up control
Operation of each group starts at intervals of
1 to 2 seconds when operation is started all at
once.
By connecting a commercially available
z
schedule timer, you can operate weekly
programmes.
Parts and their
functions
1
1
ON/OFF button
Press to start or stop individual groups of
indoor units.
The lamp lights during operation (green).
2
Name plate
Stick a label here to indicate the room or
the area.
3
ALL ON button
Press to start all air conditioners.
4
ALL OFF button
Press to stop all air conditioners.
2
3 4
(EN)
5