Transmission Test - Danfoss CF-RP Benutzerinstruktion

Instruction CF-RP Public (Tamperproof) Room Thermostat

3. Transmission Test

Initiate transmission test on Room
Thermostat - fi g. 1
• Press the push button
• LED goes ON
Link test is satisfactory
• LED goes OFF
Link test is unsatisfactory
• LED fl ashes 5 times
No Link connection to Room
Thermostat
• Try to relocate Room Thermostat in the room
• Or install Repeater Unit (CF-RU) and locate be-
tween Master Controller and Room Thermostat
Note: Master Controller output LED(s)
to the room thermostat, fl ash(es) during Link test
VI.UH.P3.80 Produced by Danfoss Floor Heating Hydronics 01.2006
connected
7