Installation - Danfoss CF-RP Benutzerinstruktion

Instruction CF-RP Public (Tamperproof) Room Thermostat
Front Cover - fi g. 3
Front Cover release

2. Installation

Note:
• To activate batteries in the Room Thermostat
please remove enclosed strips from the batteries
• The assignment of the Room Thermostats to the
Master Controller should be within 1½m distance
Activate Install mode on
Master Controller - fi g. 1
• Use the menu selection button
Install mode. Install LED
• Activate Install mode by pressing OK
LED goes ON
Activate Install mode on
Room Thermostat
• Press the push button
during communication
VI.UH.P3.80 Produced by Danfoss Floor Heating Hydronics 01.2006
to select the
fl ashes
. LED and
. Install
fl icker
5