Klarstein VIRTUOSA FLEX 90 Bedienungsanleitung Seite 72

EN
72
Specific Failure and Solution
Problem Possible causes
The LED does No power supplied.
not come on
when unit is
plugged in.
The accessorial power
board and the display board
connected failure.
The accessorial power board is
damaged.
The display board is damaged.
The Cooking High temperature of the hob.
Mode Indicator
comes on, but
heating does
There is something wrong with
not start.
the fan.
The power board is damaged.
Heating stops Ungeeignetes Kochgeschirr.
suddenly during
Der Durchmesser der
operation and
Topfunterseite ist zu klein.
the display
flashes
Cooker has overheated;
Pan detection circuit is
damaged.
What to do
Check to see if plug is secured
tightly in outlet and that outlet
is working.
Check the connection.
Replace the accessorial power
board.
Replace the display board.
Ambient temperature may be
too high. Air Intake or Air Vent
may be blocked.
Check whether the fan runs
smoothly if not , replace the
fan.
Replace the power board.
Use the proper pot (refer to the
instruction manual.)
Unit is overheated. Wait for
temperature to return to normal.
Push "ON/OFF" button to
restart unit.
Replace the power board.